Imax B6AC+ Balance Charger - Toys Products

Feature
Charge / Discharge the 1.2V-18V NiMH/NiCD battery pack
Delta-peak sensitivity: Automatic termination program based on principle of the Delta-peak voltage detection.
For NiCd pack; Detect Minus delta V >= 12 mV/cell
For NiMH pack For NiCd pack; Detect Minus delta V >= 7 mV/cell
Automatic Charging current limit: Limit the charging current when charging NiMH/NiCd battery Capacity limit: Limit excessive capacity automatically by setting the maximum value.
0.5C recommend charge rate for NiMH/NiCd pack
Processing time limit (Safe timer Setting): limit the process time to avoid any possible defect
Safe timer calculation = (Capacity mAh rate / charging current A rate) / 11.9
Charge terminal:two female 4.0mm female Banana plug (Black = Negative, Red = Positive)
Included one 1' long 18AWG Connector Adaptor: from 4.0mm Male Banana plug to Standard Dean Male plug
Included one 3" long 18AWG Connector Adaptor: from Standard Dean Female plug to alligator Clip
Included one 4" long 22AWG Connector Adaptor: from Standard Dean Female plug to Male Hi-Tec plug
Included one 4" long 22AWG Connector Adaptor: from Standard Dean Female plug to Male BEC plug
Included one 4" long 22AWG Connector Adaptor: from Standard Dean Female plug to 3.0mm Male DC plug
Included one 1' long 18AWG Connector Adaptor: from 4.0mm Male Banana plug to 5.5mm x 2.5mm Barrel Male plug
Microprocessor controlled
Charge / Discharge the 7.4V-22.2V Li-Ion/Li-Ion Polymer, 6.4V-19.2V LiFePO4 pack Battery pack


Balance each cell voltage is or less than 30mV after fully charged
Balance individual cell during discharging
Automatically Shut off after detect the voltage of abnormal cell indicated by ERROR message
Charge terminal: 5 JST male sockets installed in the charger for recharging from 2S to 6S Li-Ion/Li-Ion Polymer/LiFePO4 pack separately
3 pins male JST socket for charging 2 cells (2S) pack (7.4V pack Li-Ion pack / 6.4V LiFePO4 pack)
4 pins female JST socket for charging 3 cells (3S) pack (11.1V pack Li-Ion pack / 9.6V LiFePO4 pack)
5 pins male JST socket for charging 4 cells (4S) pack (14.8V pack Li-Ion pack / 12.8V LiFePO4 pack)
6 pins male JST socket for charging 5 cells (5S) pack (18.5V pack Li-Ion pack / 16.0V LiFePO4 pack)
7 pins male JST socket for charging 6 cells (7S) pack (22.2V pack Li-Ion pack / 19.2V LiFePO4 pack)
Charge / Discharge the SLA Battery pack
Cyclic charge/discharging : 1 to 5 and continuous process of charge --> discharge / discharge --> charge for battery refreshing.
Data storage (Store up to 5 packs in memory)
Input power monitoring


Speicification
-AC Input Voltage: 100v -240DC 50/60Hz
-DC Input Voltage: 11~18vDC

-Input terminal:5.5mmx2.5mm Barrel female plug or via attached alligator plug
-Circuit power: Max Charge: 50W / Max Discharge: 5W
-Charge Current Range: 0.1~5.0A
-Discharge current range: 0.1~1.0A
-Dimension(LxWxH): 138mm(5.4") x 148mm(5.8") x 48mm(1.8")
-Weight: 1.4 Lb (650grams)

Balance Charger