Fusion Splicer KL-280 - Telecommunications Products

Features
Fiber core can be display clearly
SingleX or Y view and X & Y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
Specefications
Model KL-280
Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length 8~16mm??oating diameter??50???
16mm??oating diameter: 250 ~ 1000???
Fiber diameter Cladding diameter??0 ~150?
Coating diameter??00~ 1000?m
Fiber Count Single
Fiber aligning method Core aligning
Return loss ??0dB
Actual average splice loss 0.02dB ??M??0.01dB (MM),
0.04dB (DS),0.04dB( NZDS)
Splicing mode auto
Splicing mode 12(templet), 188(user)
Typical Splicing time Typical 9 sec??ith standard SM fiber
Protection sleeve length 60mm, 40mm and a series of micro sleeves
Storage of splice result 5000 results?? parameter per result
Tension test 2N
Fiber display and magnification 400X?? or Y view??200X?? and Y view??
Tube heating time Typical 30 sec
Electrode life 2500
No.of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen 5 inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals RS 232
Operating condition 0 ~ 5000m above sea level,0 ~ 95%RH and -10??0??respectively,Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter;inner Li-battery(6600mAH)
Dimensions 150mm(L) x150mm (W) x160mm (H)
Weight 3.52 Kg including battery

Fusion Splicer, OTDR, Fiber Cleaver, Laser Source, Light Source, Fiber Connector, Power Meter, Multimeter, Optical Fiber Fault Locator, Tool Kit