10/100M Fiber Ethernet Media Converter With 2 Ethernet Ports& 1 Fiber Port Internal Power Supply FT-10/100-2 Series Brief FT-10/100-2 Series Auto-Negotiation Ethernet media converter provides connection and switch from 10/100Base-Tx to 100Base-Fx. It can extend network distance from 100m over copper to 2km over multimode fiber or to 100km over single mode fiber. FT-10/100-2TX also offers 2x100Mbps Full-Duplex power ports, once used in pairs for transmission, each port should be unaided and noninterference. Features: Compliant with IEEE802.3/u 10Base-T and 100BASE-TX/FX standard. Support 802.3x full-duplex flow control and Back Pressure half-duplex flow control Support Auto MDI/MDIX auto-negotiation 2* RJ45 ports are isolated, and should work in pairs with the facility which got the same series number. While TX1 at custom side coneects TX1 at the terminaland same connection by TX2. Support power ports configuring of Bit-rate, duplex status, and Auto-negotiate 10/100M based on net-work management. Support link-loss alarm function, can transmit fiber interruption alarm to power ports based on net-work management. Support primary setting of ports by on/off switches. Support 1916kbs frame transmission, can compliant with transmission sorts of extended protocol data frame. Technical Specifications: Standard Protocol IEEE802.3 10 Base-T standard IEEE 802.3u 100Base-TX/FX standard Connector Two RJ-45 connector, one SC/ST fiber connector Operation mode Full duplex mode or half duplex mode Power consumption <5W operation temperature 0~50??Storage temperature -20~70??Humidity 10%~90% no condension Measurement 120(W)?32(H)?146(D)mm (stand-alone) 145?75mm (slide-in modules) |
;)
