10/100M Fiber Ethernet Media Converter With 4 Ethernet Ports& 1 Fiber Port Internal Power Supply FT-10/100-4 Series Brief: FT-10/100-4TX series Ethernet media converter provides connection and switch from 10/100Base-TX to 100Base-FX. It can extend network distance from 100m over copper to 2km over multimode fiber or to 100km over single mode fiber. FT-10/100-4TX also offers 4x100Mbps Full-Duplex power ports. Features: Compliant with IEEE802.3/u 10Base-T and 100BASE-TX/FX standard. Support 802.3x full-duplex flow control and Back Pressure half-duplex flow control Support Auto MDI/MDIX auto-negotiation 4*RJ45 ports are isolated, and should work in pairs with the facility which got the same series number. Support power ports configuring of Bit-rate, duplex status, and Auto-negotiate 10/100M based on net-work management. Support link-loss alarm function, can transmit fiber interruption alarm to power ports based on net-work management. Support primary setting of ports by on/off switches. Support 1916kbs frame transmission, can compliant with transmission sorts of extended protocol data frame. Technical Specifications: Standard Protocol IEEE802.3 10 Base-T standard IEEE 802.3u 100Base-TX/FX standard Connector Two RJ-45 connector, one SC/ST fiber connector Operation mode Full duplex mode or half duplex mode Power consumption <5W operation temperature 0~50??Storage temperature -20~70??Humidity 10%~90% no condension Measurement 120(W)?32(H)?146(D)mm (stand-alone) 145?75mm (slide-in modules) |
;)
