DWJ120-1600-2ply(PLC Cut)
?. Main Technical Parameter
1. Model Type: DWJ120-1600-2ply(PLC Cut).
2. Maximum Mechanical Speed: 120 m/min
3. Breath: 1600 mm
4. Flute Type: UV, B1 ,B2 flute mm Height, ?2 /300mm?may select flute A, C, BC, D, E,F alternate ?
5. Economical production speed:
70-110 m/min, single face(2 ply )
Condition of Checking up and Acceptance (Examining condition): If the production line has been put into 2ply
production 10 minutes, run by 90% of the Maximum operation speed:135 m/minute here,
the production line could be checked up and accepted.
Paper For Test:
Test for the highest speed of 2 ply: corrugated paper:125 g/m2 outer paper: 300 g/m2
Common test for 3ply and 5 ply: corrugating paper?113-125g/m2?Core Paper 125g/m2?Inner paper ?120-150g/m2?
outer paper 120-200g/m2 ?Note?The quality of paper is measured up above the standard of)
NATIONAL STANDARD B GRADE OF CHINA.
Paper For Production?
Corrugating paper ?105-115g/m2?Core Paper 105-115g/m2?
Inner paper ?110-135g/m2; outer paper 120-150g/m2
6.?Steam Consumption? ~800 kg/h
?Steam Pressure? 1.1-1.2 MPa
?The capacity of boiler (provided by Buyer)? 1 ton/hour
7.? Power supply? ? 100 KW, (380/220Vac, 3 phases, 4 wires, 50Hz, or ? )
8. ?Length of production line? ?30 meters
?Width of the production line: ?10~15 meters, better without pillar inside.
9.? Length of cutting? 300-1300 mm
10. Accuracy of cutting(at stable speed)? ? 1.5 mm
11. The color of paint can be selected by customer (better with color sample), our favorite color will be: main color, milk white;
color for electric cabinet, dark purple blue?
|
;)
